Senergy

OCLC-HH-B

Freedom from TB wire disturbance

The Online Current Loop Calibrator- Hand Held - Basic (OCLC-HH-B) is a lightweight, portable, handheld current generator for loop current sensing instruments testing and calibration.

	It generates current signal (mA) for instruments calibration and testing.
	It is built around patented technology developed at BARC, Mumbai.
	It's patented; unique current generation technique dynamically isolates the actual transmitter loop current and presents user set current to the loop sensing instruments. Thereby allowing online testing of the instruments.

Advantages

	No need to isolate the measuring instrument for the test/calibration.
	The instrument wiring is not disturbed.
	Transmitter loop current is unaffected.
	Other instruments sensing the same loop current are also unaffected.

	Output current range: 0.00 - 21.00mA.
	Output adjustment: using fine and coarse knobs.
	Accuracy ±0.015% of span.
	Current output load, selectable from 50 to 250 Ohms.
	Display resolution: 0.01mA.
	Display update rate: thrice per second.
	Display Type: 4-1/2 digit LCD.
	Power supply: 4 standard AA size battery, Alkaline 1.5V or NiCd 1.2V or Ni-MH 1.2V
	Battery Life: Continuous 24 hours with Ni-MH.
	Recharging time: 12 hours.
	Battery low indication.
	Enclosure: ABS RAL Grey colour, Size 100 mm W × 210 mm L ×40 mm H.
	Ingress Protection: IP54.
	Output Protection: over-voltage (30V ac/dc) and over-current.
	Terminals: a set of crocodile clip and probe.
	Operating Temperature: 5-45 Deg. C
	Humidity: 0-95% RH (Non-condensing)
	Insulation Resistance: >100MOhms.
	Isolation Voltage: 1500V rms.